Cactus V6 IIs User Manual page 68

68
2. To temporarily unlock the selection
3. Temporary unlock can be enabled or
4. To permanently unlock the selection
Note:
level of a single group by simultaneously
pressing a group button and turning the
dial (see Section 12.1.1) will be unaffected.
16.3
In the main screen of the V6 IIs TX, pressing
Swap
change it to one of the following modes:
Control
• Zoom Control <ZOOM>: controlling the zoom
All manuals and user guides at all-guides.com
2 seconds. The LCD will show
upper left-hand corner.
dial, press the selection dial or
once. Alternatively, press and hold any
group button to select a group for power
level adjustment. The LCD will show
indicate the temporary unlock status.
The dial will be locked again when no
button or dial is pressed or turned in
2 seconds.
disabled in the <TEMPORARY UNLOCK> menu.
dial, press and hold the selection dial
for 2 seconds.
or
The short-cut for adjusting the power
or the push-in selection dial once will
level of the connected flashes and the
at the
to