60
15. Advanced Operations
15.1
The V6 IIs is equipped with an auto-focus
(AF) assist LED and it is capable of emitting
Auto-
an AF-assist light in accordance with the
focus
camera's command. The power of the AF-assist
Assist
light can be adjusted in either TX or RX
Light
mode to best suit your working environment.
To conf igure the AF-assist LED:
1. Switch on the V6 IIs in TX or RX mode.
2. Press
3. Turn the selection dial to <AF-ASSIST>
Each V6 IIs will memorize the AF-assist
light setting in the TX and RX
independently. In a setup when the AF-assist
light of both the TX and RX are turned on,
the AF-assist light on both devices will
light up simultaneously when the camera
commands the TX to do so.
All manuals and user guides at all-guides.com
Please note that the set up will be
applied to that operating mode only.
and turn the selection dial to
<PREFERENCES>. Press
and press
. You will then be able to
turn on and select the power of the
AF-assist LED.
.