Remote Manual Power And Zoom Control - Cactus V6 IIs User Manual

36
12. Remote Manual Power
Apart from flash triggering, the V6 IIs can
also command the manual power and manual
zoom angle of your flash. On each RX, choose
the appropriate flash prof ile for each flash
to be connected. The V6 IIs TX will then be
able to command the flash to f ire from 1/128
to 1/1 full power, and at a zoom angle
between 16mm and 200mm.
To remotely control the power of your flash
units:
1. Connect the flash units to the V6 IIs.
2. Switch on the flash units
3. Apply the correct flash prof ile for each
4. If you want to command the flash to f ire
V6 IIs offers two power def initions for
users to command the flashes' power in the
most convenient way.
All manuals and user guides at all-guides.com
Control and Zoom Control
Then switch on the V6 IIs in RX mode.
V6 IIs.
above the x-sync speed, turn on the HSS
mode on your flash units (see Section
13.1) .
in TTL mode.