Flash Setup - Cactus V6 IIs User Manual

10. Flash Setup

The V6 IIs transceiver commands flashes to
f ire at a particular output via flash
prof iles. There are three ways to obtain
the correct flash prof iles:
1. Apply the <AUTO> flash prof ile (see
2. Choose from the pre-installed flash
3. Customize the auto prof ile in the Cactus
10.1
The Auto Flash Prof ile in the V6 IIs is the
default prof ile that works with all Sony
Applying
system flashes. To apply the auto prof ile, no
an Auto
setup is required.
Flash
Profile
Alternatively, set up the auto prof ile as you
do in choosing a flash-specif ic prof ile in
the <FLASH PROFILE> menu (see Section 10.2) .
All manuals and user guides at all-guides.com
Section 10.1) .
prof iles in the V6 IIs (see Section 10.2) .
Prof ile Editor on a PC or Mac (see
Section 10.3) .
29