System Select; Automatic Multi-Scan System; Select Computer System Manually - Sanyo PLV-HD10 Owner's Manual

BASIC OPERATION
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA or UXGA (refer
to "COMPATIBLE COMPUTER SPECIFICATION" on pages 50-51). When a computer is selected, this projector
automatically tunes to incoming signal and projects the proper image without any special setting. (Some computers need to
be set manually.)
The projector displays one of the Auto, -----, Mode 1 ~ Mode 20, or the system provided in the projector.
When projector cannot recognize connected signal as PC
Auto
system provided in this projector, Auto PC Adjustment
function operates to adjust projector and message "Auto"
is displayed on SYSTEM Menu icon.
When image is not provided properly, manual adjustment
is required. (Refer to P30 and 31.)
There is no signal input from computer. Make sure
––––
connection of computer and a projector is set correctly.
(Refer to TROUBLESHOOTING on page 43.)
User preset adjustment in MANUAL PC ADJUSTMENT.
Mode 1
Adjustment data can be stored in the Mode 1-20.
Computer systems provided in the projector. The
SVGA 1
projector chooses proper system and displays it.
✽
Mode 1 and SVGA 1 are examples.

SELECT COMPUTER SYSTEM MANUALLY

This projector automatically selects PC system among those provided
in this projector and PC system can be also selected manually.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SYSTEM SELECT Menu icon.
2 Press POINT UP/DOWN button to move a red arrow pointer to
system that you want to set, and then press SELECT button.
26

SYSTEM SELECT

AUTOMATIC MULTI-SCAN SYSTEM

SYSTEM MENU
SYSTEM SELECT Menu icon
Displays system being selected.
SYSTEM SELECT MENU (PC)
SYSTEM SELECT Menu icon
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (1 ~ 20) set
in DISPLAY ADJUST
Menu. (P30, 31)