DAXOM UKDAX-10EBT Manual page 59

PROBLEM
REASON
 No Electric
 Residual Current Device or
Fuse is Off
 Connection problem of
power card with control
pannel card
 LCD Card Damage
 Not proper connections
 Sealing Gasket is damaged
 Keyboard Damage
 PCB Damage
 Unproper Cable Using
 Loose Connection
 High Pressure
 Device is set as radiator
operation mode
 Flow Sensor Damage
 Resistance Damage
 Limit thermostad cut off
current
 Triac Damage
 Control Card Damage
 Not Enough Water Pressure
 Installation Pipe Water
Leakage
● ●
●
●
●
●
● ●
●
59
SOLUTION WAYS
 Control if there is electric
or not.
 Control residual current
device and fuse
Call authorised service
 Connections must be
made again
 Renew the sealing
gasket
 Call authorised service
 Turn Off the device, call
authorised service
 Discharge excess water
●
from discharge valve.
 Control device setting
 Call authorised service
 Call authorised service
 Control water pressure
 Remove the leagage of
●
heating system
installation