Advertisement
6.4.2. Radiator and Temperature Setting
While
or
radiato system) radiator heating setting can be made between
pressing
or
expression fizzle out, setting temperature value starts to blink. While the device is
operating for boiler heating, device operation mode must be changed as radiator
heating for setting radiator temperature. At the end of the process, device must be
taken to previous operation mode. (Check 6.4.8)
After 2 sec later setting completed, device operation temperature and "Water
Temp" expression are seen at the LCD. Reaching seeting temperature of device
may take time. After boiler water heating is completed, radiator heating does not
start immediately, radiator heating starts after pump operates for a while for
temperature balance.
6.4.3. Boiler Temperature Setting
symbols are seen at LCD Display, (when device is operating for
buttons. While radiator heating setting is made, "Water Temp"
32
o
o
35
C and 80
C by
Advertisement
