Advertisement
5.2.2. Electric Connection
Electrical installation must be done by authorized person according to device
capacity and with suitable diameter cable. Electric of device must have suitable
specification for for cut off device power and residual current device that has amper
value and fuse separately. Fuse must be near to device. Grounding of device must
absolutely be done. If there is not grounding at the place that the device is installed,
grounding must be made for device by authorized person. Operative of grounding
must be controlled in determined periods. Fuse must locate near the device and
device cable must not be strained while connect to fuse. Connection of cables to
fuse must be made by authorized person.
Make sure that cables are connected to correct places
Loose cable connections can be caused to accident
Cable diameter that is calculated according to device capacity and cable length,
residual current device and fuse amper values can be seen at the following table.
23
Advertisement
