Advertisement
2610041926 10-15 WC18CV_WC18C 10/7/15 9:07 AM Page 9
Holster Side Mounting Instructions
The holster may be mounted to shelf or
workbench side walls through the side
mounting holes using the hardware provided
(Fig. 5).
1. Determine desired mounting position and
orientation. Holster may be mounted from
either its left or right side. See Fig. 6a for
acceptable mounting positions.
2. If mounting holes are not available, mark
and pre-drill holes for side mounting bolts.
Side mounting bolt spacing is 10 inches
(254mm).
FIG. 5
* Hardware included with holster
BOTTOM
SIDE MOUNTING
HOLE
NUT*
m )
4 m
( 2 5
HOLE A
0 "
R 1
HOLE B
-9-
3. Remove Bolt 1 (Fig. 2a) from bottom side
mounting hole.
4. Attach holster to wall as shown in Fig. 5
Fasten holster securely to
side walls.
WARNING
securely fastened may become dislodged
and lead to personal injury
Mount holster in only
r e c o m m e n d e d
WARNING
orientations. Failure to properly orient
holster may cause holster and/or power tool
to become dislodged and lead to personal
injury.
WALL
HOLSTER
Holster not
TOP
SIDE MOUNTING
HOLE
WASHER*
SIDE
MOUNTING
BOLT* (2x)
Advertisement
