Rh-29 Synthesizer; General Instructions For Synthesizer Troubleshooting - Nokia RH-29 Series Manual

Nokia Customer Care

RH-29 Synthesizer

There is only one PLL synthesizer generating frequencies for both Rx and Tx for all three
bands. VCO frequency is divided by 2 or by 4 in Mjoelner depending on which band is
active.

General instructions for synthesizer troubleshooting

Connect the phone to a PC with DAU-9P cable and dongle and follow these instructions:
Start Phoenix Service Software (dongle needed):
Select
Wait until phone information shows in the lower right corner of the screen.
Set operating mode to local mode.
Start RF Control window:
Select
Wait until the RF Controls window pops up
Set the synthesizer to the following mode:
Select
Issue 1 05/2004
Company Confidential
Scan Product
Testing
RF Controls
Band
Active unit
Operation mode
RX/TX Channel
Copyright © 2004 Nokia Corporation
Company Confidential
6b - RF Troubleshooting
Ctrl-R
Alt-S
R
GSM900 or DCS1800
RX
Continuous
37 or 700
RH-29
Page 7