Nokia RH-29 Series Manual page 17

Nokia Customer Care
The levels that are given here are measured using a resistive probe (50Ohm semi-rigid
cable).
Start Phoenix Service Software
Open the FBUS connection
Select
Wait until phone information shows in the lower right corner of the screen.
Set operating mode to local mode
Select
Wait until the RF Controls window pops up
Select
Please refer to the troubleshooting chart for proper levels at different test points.
Issue 1 05/2004
Company Confidential
Scan Product
Testing
RF Controls
Band
Active unit
Operation mode
RX/TX Channel
Copyright © 2004 Nokia Corporation
Company Confidential
6b - RF Troubleshooting
Ctrl-R
Alt-S
R
GSM 900 or DSC1800
RX
Continuous
37 or 700
RH-29
Page 13