YOUR ULTIMATE ALLY IN POWER
BL1450U
USER MANUAL
1
2
3
4
USB
USB
USB-C
1450
1450
VA
AVR
FEATURES
1.
Power Switch
2.
Power On Indicator
3.
LCD Module Display
4.
LCD Display Toggle/Selected Switch
5.
USB Charging Ports
6.
Battery and Surge Protected Outlets
7.
Full-time Surge Protected Outlets
Cyber Power Systems (USA), Inc.
BL1450U
BL1450U
10
12
13
USB-C
6
VA
AVR
8.
Circuit Breaker
9.
USB Ports to PC
10. Communication Protection Ports
11.
Wiring Fault Indicator (red)
12. Coax/Cable/DSS Surge Protection
13. Widely-Spaced Outlets
PRODUCT REGISTRATION
Thank you for purchasing a CyberPower product. Please take a few minutes to register your
product at: www.cyberpower.com/registration. Registration certifies your product's warranty,
confirms your ownership in the event of a product loss or theft and entitles you to free technical
support. Register your product now to receive the benefits of CyberPower ownership.
IMPORTANT SAFETY WARNINGS
This Manual Contains Important Instructions that should be followed during Installation and
9
Maintenance of the UPS and batteries.
CAUTION! To prevent the risk of fire or electric
shock, install in a temperature and humidity
controlled indoor area free of conductive
11
contaminants. (Please see specifications for ac-
ceptable temperature and humidity range).
CAUTION! To reduce the risk of electric shock,
13
do not remove the cover except to service the
battery. Turn off and unplug the unit before
servicing the batteries. There are no user ser-
8
viceable parts inside except for the battery.
CAUTION! Hazardous live parts inside can be
energized by the battery even when the AC
7
input power is disconnected.
CAUTION! The UPS must be connected to an
AC power outlet with fuse or circuit breaker
protection. Do not plug into an outlet that is
not grounded. If you need to de-energize this
equipment, turn off and unplug the unit.
CAUTION! To avoid electric shock, turn off the
unit and unplug it from the AC power source
before servicing the battery.
CAUTION! To reduce the risk of fire, connect
only to a circuit provided with 20 amperes
maximum branch circuit over current protec-
tion in accordance with the National Electric
Code, ANSI/NFPA 70.
4241 12th Avenue East, Suite 400 | Shakopee, MN 55379 | CyberPowerSystems.com
(SAVE THESE INSTRUCTIONS)
DO NOT USE FOR MEDICAL
OR LIFE SUPPORT EQUIPMENT!
CyberPower Systems does not sell products for
life support or medical applications. DO NOT
use in any circumstance that would affect the
operation and safety of life support equipment,
medical applications, or patient care.
DO NOT USE WITH OR NEAR AQUARIUMS!
To reduce the risk of fire or electric shock, do
not use with or near an aquarium. Condensa-
tion from the aquarium can cause the unit to
short out.
DO NOT USE THE UPS
ON ANY TRANSPORTATION!
To reduce the risk of fire or electric shock, do
not use the unit on any transportation such
as airplanes or ships. The effect of shock or
vibration caused during transit and the damp
environment can cause the unit to short out.