System Adjustment - Sanyo POA-PN01A Owner's Manual

Controlling the Projector

SYSTEM Adjustment

This function is to select the color system of video signal or scanning sys-
tem of component signal input to the projector. Select a system with the
radio buttons to match the color system or scanning system of input
source, and then press the Set button. The available systems and operation are listed
below.
Adjustment items
Color system
(VIDEO/S-VIDEO Input)
Scanning system
((Y, Cb/Pb, Cr/Pr Input)
These selections will not appear when the source mode is selected to the computer mode.
38
Operation
AUTO: Automatically detect the color system of input signal.
PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N: Manually select
the color system of input signal.
AUTO: Automatically detect the scanning system of input signal.
1080i, 1035i, 720p, 575p, 480p, 575i, 480i: Manually select the
scanning system of input signal.
Available selection when the VIDEO/S-VIDEO input
Available selection when the Y, Cb/Pb, Cr/Pr input