Software Options; Rea Mlv-2D Models - REA MLV-2D Operating Manual

Optional test cards for extended test equipment monitoring
08300912 Calibrated test card with EAN/UPC codes
08300911 Calibrated test card GS1 Data Matrix codes
Measurement desk: one desk as a support table for parts/cans that can neither be laid
or stood on the REA MLV-2D for verification work (part number: 030.025.107)
90° coaxial lighting: vertical lighting is provided for reflective materials, dot-peened
codes or codes in a groove (part no. 94031603)
2.3

Software options

030.207.101 Optional symbologies (internal)
08300920 ScanLink: verification of structured code content
(installed separately)
030.207.170 Article Database 32 (installed separately)
030.035.180 Code analysis (internal software option): software add-on
for customer-specific analysis of data structures
by using a definition table
MLV-2D DPM ISO/IEC TR 29158 (AIM DPM Guideline 2006)
standard (internal software option): quality evaluation for
direct part marking, restricted to
45° lighting
Where re-orders of internal software options are placed, delivery consists of an
activation code, which must be entered in TranWin32.
The scope of delivery for re-ordered software options consists of a data medium, a
handbook and an activation code.
3

REA MLV-2D models

All REA MLV-2D models share the same basic design. Any changes to this design
result from the various camera modules and the various base plate configurations.
The REA MLV-2D devices supplied with 90° coaxial lighting include an additional power
adapter and the built-in coaxial lighting in the scope of delivery. The coaxial lighting
can be removed, to also enable the REA MLV-2D to be used with the normal standard
45° and 10° lighting. 90° coaxial lightning must be ordered for a new device and
cannot be added later.
© REA Elektronik GmbH, 64367 Mühltal, Germany --- REA MLV-2D Manual Version 3 – 21/12/2015
REA VERIFIER
Page 7 of 98