Installation; Positioning The Lcd Hdtv; Wall Mounting (Optional); Getting Started - Sanyo DP26648 Owner's Manual

INSTALLATION

POSITIONING THE LCD HDTV

Always use a firm-flat surface when posi-
tioning your HDTV. Do not position the unit in a
confined area. Allow adequate space for proper
ventilation.
DP26648
(DP32648)
NOTE: All dimensions are in inches.
WALL MOUNTING
Use the screws that are threaded into the stand-
mounting inserts on the back of your HDTV to
secure it to a wall mounting kit.
NOTE:Wall Mounting kit is not supplied.
VESA standard interface:
200 x 200
Wall Mounting
Inserts
Mounting screws measurements:
M6 Diameter, Length—12mm (min.) 16mm (max.)
(OPTIONAL)
Need help?
Visit our Web site at

GETTING STARTED

1
Install supplied batteries in the Remote.
eneloop
(2
"AAA"
P
RECAUTIONS
Do not use rechargeables together with
dry cells, other types, mixed new and old,
or batteries with different charge levels.
Do not expose the Remote or batteries
to moisture or heat.
Match the "+" and "–" signs on the batteries with marks
inside the Remote Control.
eneloop
For battery recharging, please refer to your
battery charger's instructions
Please recycle used up rechargeable batteries.
For more information visit : www.eneloopusa.com
2
Antenna Connection for off-air signals
ANTENNA
OR
CABLE
THE TUNER IN THIS HDTV CAN RECEIVE:
a. Digital and Analog off-air signals from an
antenna.
b. Analog or ClearQAM cable channels from a
direct Cable TV connection.
NOTES: You must use the on-screen MENU to
Search for ClearQAM Cable channels. (See
page 12.)
For the best picture, connect your Cable box
or Satellite receiver to HDMI1, 2, or compo-
nent jacks (Video2 or 3).
This HDTV can receive ANY unscrambled RF
signal being broadcast.
www.sanyoctv.com
rechargeable batteries)
Ni-MH
(battery charger not included).
ANALOG / DIGITAL
ANTENNA IN
OR
1-800-877-5032
or Call
5