Table of Contents
Advertisement
Quick Links
1.
OVERVIEW.......................................................................................................................................... 1
2.
INSTALLATION................................................................................................................................... 2
2.1. CARE AND HANDLING OF OPTICAL FIBER............................................................................ 3
2.1.1. Safety .............................................................................................................................. 3
2.1.2. Assembly......................................................................................................................... 3
2.1.3. Labeling........................................................................................................................... 3
2.1.4. Handling and Connecting Fibers ..................................................................................... 4
3.
SPECIFICATIONS............................................................................................................................... 5
3.1. SERIAL VIDEO INPUT ............................................................................................................... 5
3.2. SERIAL VIDEO OUTPUT ........................................................................................................... 5
3.3. OPTICAL OUTPUT..................................................................................................................... 5
3.4. ELECTRICAL ............................................................................................................................. 5
3.5. COMPLIANCE ............................................................................................................................ 6
3.6. PHYSICAL .................................................................................................................................. 6
4.
STATUS INDICATORS AND DISPLAYS ........................................................................................... 7
4.1. STATUS INDICATOR LEDS....................................................................................................... 7
4.2. DOT-MATRIX DISPLAY / CARD STATUS AND CONTROLS ................................................... 8
4.2.1. Display of Warning Status Indications............................................................................. 9
4.2.2. Displaying the Video Standard ........................................................................................ 9
4.2.3. Displaying the Transmit Power...................................................................................... 10
4.2.4. Displaying the Nominal Wavelength.............................................................................. 10
4.2.5. Displaying the Link Distance Option ............................................................................. 10
4.2.6. Displaying the Link Capacity Usage.............................................................................. 11
4.2.7. Displaying the Firmware Version................................................................................... 11
4.2.8. Controlling Monitoring Video Output ............................................................................. 11
4.2.9. Password Protection for Channel Blocking ................................................................... 12
4.2.10. Setting the Orientation of the Text on the Card Edge Display....................................... 12
4.2.11. Resetting Factory Defaults ............................................................................................ 13
5.
JUMPERS AND LOCAL CONTROLS .............................................................................................. 14
BY THE GLOBAL FRAME STATUS ........................................................................................ 14
7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter
TABLE OF CONTENTS
Revision 1.2Revision 1.2
7700 MultiFrame Manual
Advertisement
Table of Contents
Related Manuals for evertz 7707VT-8-HS
Summary of Contents for evertz 7707VT-8-HS
-
Page 1: Table Of Contents
7700 MultiFrame Manual 7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter TABLE OF CONTENTS OVERVIEW............................1 INSTALLATION........................... 2 2.1. CARE AND HANDLING OF OPTICAL FIBER................3 2.1.1. Safety ..........................3 2.1.2. Assembly......................... 3 2.1.3. Labeling........................... 3 2.1.4. Handling and Connecting Fibers ..................4 SPECIFICATIONS.......................... - Page 2 TRAPS ........................16 ISTA ® Figures Figure 1-1: 7707VT-8-HS Block Diagram ......................1 Figure 2-1: 7707VT-8-HS Rear Panel........................2 Figure 2-2: Reproduction of Laser Certification and Identification Label.............. 3 Figure 4-1: Location of Status Indicators, Jumpers and Controls................. 7 Figure 4-2: Card Edge Menu Structure ......................... 8 Tables Table 6–1: VistaLINK...
- Page 3 Oct 09 Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied.
- Page 4 7700 MultiFrame Manual 7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter WARNING Never look directly into an optical fiber. Non-reversible damage to the eye can occur in a matter of milliseconds. Revision 1.2...
-
Page 5: Overview
SDI/DVB-ASI and/or HD-SDI feeds. The 7707VT-8-HS and companion 7707VR-8-HS will transparently pass incoming HD-SDI or SDI/SDTi video with embedded AES audio or other data in the horizontal or vertical ancillary data space. Monitoring and control of card status and parameters is provided locally at the card edge or remotely via VistaLINK ®... -
Page 6: Installation
7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter INSTALLATION The 7707VT-8-HS comes with a companion rear plate that has eight BNC connectors and one LC Duplex optical connector. For information on mounting the rear plate and inserting the module into the frame see section 3 of the 7700FR chapter. -
Page 7: Care And Handling Of Optical Fiber
2.1.1. Safety CLASS 1 LASER PRODUCT 2.1.2. Assembly Assembly or repair of the laser sub-module is done only at Evertz facility and performed only by qualified Evertz technical personnel. 2.1.3. Labeling Certification and Identification labels are combined into one label. As there is not enough room on the product to place the label, it is reproduced here in the manuals. -
Page 8: Handling And Connecting Fibers
7700 MultiFrame Manual 7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter 2.1.4. Handling and Connecting Fibers Never touch the end face of an optical fiber. Always keep dust caps on optical fiber connectors when not connected and always remember to properly clean the optical end face of a connector before making a connection. -
Page 9: Specifications
7700 MultiFrame Manual 7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter SPECIFICATIONS 3.1. SERIAL VIDEO INPUT Number of Inputs: 8 Inputs (1 configurable as input or output) Standards: SMPTE 292M (Inputs 1-7 only), SMPTE 259-C, SMPTE 305.2M(SDTi), (DVB-ASI) Connector: BNC per IEC 61169-8 Annex A Equalization: Automatic to 100m at 1.485Gb/s (inputs 1-7 only) or 250m at 270Mb/s with Belden... -
Page 10: Compliance
7700 MultiFrame Manual 7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter 3.5. COMPLIANCE Electrical Safety: CSA Listed to CSA C22.2 No. 60065-03, UL 60065-03 IEC 60065-(2001-12) 7th Edition Complies with CE Low voltage directive 93/68/EEC Laser Safety: Complies with 24 CFR 1040.10 and 1040.11 except for deviations pursuant to LN No. -
Page 11: Status Indicators And Displays
7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter STATUS INDICATORS AND DISPLAYS The 7707VT-8-HS has 8 LED Status indicators and a 4 digit alphanumeric display on the front card edge to show operational status of the card at a glance. The card edge shaft-encoder/pushbutton is used to select various displays on the alphanumeric display. -
Page 12: Dot-Matrix Display / Card Status And Controls
7700 MultiFrame Manual 7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter 4.2. DOT-MATRIX DISPLAY / CARD STATUS AND CONTROLS Additional status monitoring and controls are provided via the 4-digit dot-matrix display located at the card- edge. The card-edge shaft-encoder/pushbutton (see Figure 4-1) is used to navigate through the display menus. -
Page 13: Display Of Warning Status Indications
4.2.2. Displaying the Video Standard The 7707VT-8-HS detects the video standard of the signals present at its inputs. To display the video standard, select the STAT menu item in menu level 1, then use the shaft encoder to display the desired video channel (from VID1 to VID8) and press the shaft encoder to select it. -
Page 14: Displaying The Transmit Power
4.2.3. Displaying the Transmit Power The 7707VT-8-HS can display the currently utilized transmit power from the XFP module in (dBm). To display the output power, select the STAT menu item in level 1, use the shaft encoder to display the... -
Page 15: Displaying The Link Capacity Usage
The MON menu item allows the user to control which input video signal (VID 1 through VID7) will be passed through to the Input channel 8 output on the 7707VT-8-HS. To select the output signal, select the CTRL menu item in menu level 1, use the toggle switch to display the MON option and press the pushbutton to select it. -
Page 16: Password Protection For Channel Blocking
7700 MultiFrame Manual 7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter 4.2.9. Password Protection for Channel Blocking The PSWD menu item allows the user to set the channel blocking for each of the individual video inputs. This function is password protected. To enter the menu, use the shaft encoder to select CTRL in level 1 of the menu. -
Page 17: Resetting Factory Defaults
4.2.11. Resetting Factory Defaults The FRST menu option will return the 7707VT-8-HS to factory defaults. To return all settings to factory defaults, select the CTRL menu item in menu level 1, use the shaft encoder to display the FRST menu selection and use the pushbutton to select it. -
Page 18: Jumpers And Local Controls
7700FR frame's global status bus. FRAME STATUS: To monitor faults on the 7707VT-8-HS with the frame status indicators on the Power Supply FRAME STATUS LEDs and on the frame's Fault Tally output, install this jumper in the ON position. -
Page 19: Vistalink ® Remote Monitoring/Control
(GUI), third party or custom manager software may be used to monitor and control Evertz VistaLINK enabled fiber optic products. ® 2. Managed devices (such as 7707VT-8-HS and 7707VR-8-HS cards), each with a unique address (OID), communicate with the NMS through an SNMP Agent. Evertz VistaLINK enabled 7700 series ®... -
Page 20: Vistalink Monitored Parameters
7700 MultiFrame Manual 7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter 6.2. VISTALINK MONITORED PARAMETERS ® The following parameters can be remotely monitored through the VistaLINK interface. ® Parameter Description Indicates video status and video input standard Video Status Indicates link transmit power...
Need help?
Do you have a question about the 7707VT-8-HS and is the answer not in the manual?
Questions and answers