c)
The main tray extender kit for 17"/20" ballots
includes two parts:
The front piece installs into the MP Tray door, and is used
•
to support the ballots as they exit the printer.
•
The rear piece replaces the stock paper stop and rear tray
extension cover. Once installed, the extender can support
14", 17", and 20" paper; however, the stock paper stop
must be reinserted to support 11" paper.
d)
Reinsert and close the paper tray.
e)
Attach seal to paper tray at corner
of paper tray door.
5.
Press the switch on the bottom right side of the printer to power it on.
7