Table of Contents
Advertisement
setting up Verity Print
6
setting up Verity Print
setting up the ballot printer
1.
Set up the ballot printer table and set the ballot printer on the table.
2.
Plug in the square end of the USB printer cable
into the printer. (The flat end will be plugged into
the Verity Print.)
3.
Insert the printer power cord into the printer and
the other end into an outlet or UPS/battery
backup.
4.
Load the ballot printer with appropriate ballot paper. Note that the paper
size will vary by election, and that the printer tray used may vary depending
on the types of printers and accessories used in your jurisdiction. Follow
local procedures.
Loading ballot paper in the main tray (Tray 1)
a)
Pull out the tray 1 drawer on the printer.
b)
Load paper in the tray. If necessary, push the
blue tab and pull the paper guide to the
appropriate setting (Letter/8.5"x11", or
Legal/8.5"x14"). Paper sizes larger than
8.5"x14" require a tray extender (not available
in all jurisdictions).
Advertisement
Table of Contents
