Table of Contents
Advertisement
shutting down Verity Print
18
shutting down Verity Print
Prior to shutting down Verity Print. Print the BALLOT COUNT
REPORT in accordance with you local jurisdictions guidelines.
1.
When you have finished printing ballots and
reports, press the red power button on the back
of the Verity Print to power it off.
IMPORTANT: Wait for the Verity Print to be
completely powered down and showing a black
screen if you will be unlocking and removing the tablet. If stowing the
tablet, make sure to lock it in with the key and pull the blue latch down
to secure it in place.
NOTE: The Verity power cord has a locking connector. When inserting the connector
into a Verity device, it will make a small "click." To disconnect the power cord, grasp
the cord at the base of the black connector molding where it connects to the Verity
device, and slide back the sleeve. This will unlock the connection so that the cord
may be removed.
2.
Follow your local jurisdiction's guidelines, including chain-of-custody
procedures, when transferring equipment to your central counting location.
If you are leaving equipment in place, be sure to properly secure all
equipment, preferably behind a locked door. You may use the space below
to document local transfer procedures.
local procedures
Advertisement
Table of Contents
