Table of Contents
Advertisement
printing ballots
1.
Setup and power on the Verity Print.
you are running on AC power
Verify that the printer displays READY TO PRINT.
If the printer is offline, or in
power save/sleep mode, press
the ONLINE button to wake up
the printer.
2.
When prompted, enter the Poll Worker Code and
select Accept.
3.
Print the BALLOT COUNT REPORT in accordance
with you local jurisdictions guidelines.
4.
The Ready to issue ballots screen will display. Select
Issue a ballot.
If your jurisdiction has Verity AutoBallot, you can
use the barcode reader attached to the Verity Print
to scan barcode labels produced by your electronic
pollbook. When using AutoBallot, you will scan the
barcode, skipping steps 3-6 of this section.
(see page 11).
Confirm that
13
Advertisement
Table of Contents
