Final brainLight UX3000 User Manual page 22

Performin Device Pairin
g
ln order to use the UX3000 with your device, initial device pairing is necessary. Once the
headphone is paired to a device, it will connect ta the device automatically next lime the
power ls turned ON.
< Setting
Bluetooth
Device
UX3000
Performing initial device pairing:
1. Press and hold the Power Button for 3 seconds and the headphones will turn ON with a "Power
ON" announcomont. Tho headphonos star! device pairing mode automatically with the
Bluetooth/ ANC Status lndlcator flashlng alternately ln Red and Blue.
2. With the Bluetooth function of the device being ON, choose 'UX3000' under the device list.
The device pairing is successful if "UX3000 Connected' is shown.
Unpairing current device and performing new device pairing with another device:
1. First turn OFF the headphone. While the headphone power is OFF, press and hold the Power
Button for 5s and the headphones will turn ON and start device pairing mode with "Power ON"
& 'Palrlng' announcements and the Bluetooth/ANC Status lndlcator flashes alternately ln red
and blue.
2. With the Bluetooth function of the device is ON, choose "UX3000" under the device list. The
device pairing is succossful if "UX3000 Connected" is shown.
3. Multipoint Feature: If you reconnect the connection of the previous device after the new connection
ls establlshed, UX3000 wlll slmultaneously be connected to both devlces at the same lime.
(Multipoint supports connection up to 2 devices at the same lime.)
------------------
g
Bluetooth
C)
b
((,@
<1m
22
�