Advertisement
2 W
HAT TO DO IN CASE OF A FIRE OR FAULT
This fire system has been designed to guarantee a quick and efficient reaction in case of
alarm. To achieve this, the fire panel checks all the devices connected to it constantly,
making sure that the installation is correct and providing signals in order to warn users in
case of any event or abnormality.
It is required to know the meaning of each of the control panel indicators in order to be
able to react accordingly.
KEEP CALM
1. In an alarm situation, the fire panel activates the sounders to warn users about the
KEYPAD ACCESS
2. Remember: To be able to operate the fire panel keypad, it is required to place the key
PRESS THE SILENCE BUZZER BUTTON
3. The user may press the Silence Buzzer button in order to silence the internal buzzer.
IDENTIFY THE ALARM ROOT CAUSE
4. The LED indicators on the front of the control panel will help to identify what kind of
ACT
5. Once the cause has been identified, react according to the emergency plan that must
SYSTEM RESET
6. Once the problem has been solved, the system may be reset to clear the system and
FP400 Series User Guide
Read the following steps carefully. It could be extremely useful in case of any
alarm or fault situation.
event. It is very important to keep calm, regardless the acoustic signal, so the right
decisions may be taken.
in the ON position.
This will help to think about what to do under better conditions.
Sounders may also be disabled by pressing the Silence Sounders button.
alarm or fault has caused the system to enter in the current state.
be defined at every site.
again be in a normalised environment.
9
Advertisement
