MK Diamond Products CX-3 Honda GX160 Owner's Manual page 29

CX-3 MAINTENANCE
®
(G) (H) (I)
Loosen the Motor Tension Remove the old belt from the Clean and verify the alignment
Arm. Push the Motor forward to Engine and Blade Shaft Pulleys. of the Engine and Blade Shaft
loosen the belt. Pulleys.
(J) (K) (L)
Obtain and install a new Verify the belt is seated in all Tighten the Motor Tension Arm.
belt onto the Engine Blade grooves of the Engine and Cut-
Shaft Pulleys ting Drum Pulleys.
(M) (N) (O)
Check belt for proper tension Repeat Steps L and M until Tighten the Engine Mounting Bolts.
(Proper tension is approxi- Proper Tension is achieved.
mately 1/8-inch deflection of the
belt).
29