Transport - MK Diamond Products CX-3 Honda GX160 Owner's Manual

CX-3
®

TRANSPORT

CAUTION 1. The CX-3
2. Two people are required to lift and transport the CX-3
To lift the CX-3 , one person will lift by grasping the Handlebar and one person will lift by grasping
®
the front of the CX-3
®
Follow the assembly instructions to prepare your CX-3
Crank Wheel Assembly
(A)
Thread the crank wheel on to
the depth control screw and
tighten until snug.
Handlebar Assembly
(A)
Locate the threaded holes on
both sides of CX-3
frame.
weighs approximately one hundred and sixteen (116 pounds),
®
use care when transporting.
.
The crank wheel has a 3/8 - 16
set screw installed.
Align the handlebar with the
threaded holes on the sides of
console
®
the CX-3
for operation.
®
(B)
(B)
® console frame.
13
TRANSPORT
.
®
(C)
Use a 3/16" allen wrench to
tighten screw. Do not over
tighten as this will cause dam-
age to the crank wheel.
(C)
Install one Tri-Knob Washer onto
each Tri-Knob. Install Tri-Knobs
through the Handlebar and into the
threaded holes on the CX-3
console frame.
®