Samsung RFG237 Series User Manual page 13

REattaCHinG tHE REFRiGERatoR DooRs
4. Connect the dispenser door tube (
insert a clip on the coupler with pulling tube. Connect
the connector ( ) on the left side door and two
4
connectors ( ) at each side of the top cap.
3
The clip is enveloped inside of the top cap.
5
The dispenser door tube (
prevent water leakage from the dispenser.
CAUTION
5. Position the top table (
the 3 screws into the top table with a philips screw
driver(+). After door opened, reinsert the cap top table
( ) and close the doors.
1
When reattaching the top table, make sure that the
wires are not pressed or damaged by the hinge cover.
After assembling, close the door and check to see
whether the door has gaps between gaskets or is tilted.
If you see one of them, please refer to "Ad justing the
doors" page on 15.
) and then
5
) must be fully inserted to the marked line to
5
) in place. Insert and tighten
2
3
4
dispenser door tube
coupler
1
3
2
Setting Up _13