Dometic BUTTNER MT iQ SolarPRO Installation And Operating Manual page 15

MT iQ SolarPRO
8.2 Switching between the main displays
➤ Press the
button to switch between the main displays.
*Only available if the battery voltage measurement is activated, see chapter "Deactivating or activating the bat-
tery voltage display" on page 13.
8.3 Resetting the solar charge counter
1. Press and hold the
2. Press the button until "RESET 0 Ah" is displayed.
3. Press and hold the
✔ "OK" is displayed.
✔ The settings are saved.
4. Press the button or wait for 10 seconds to quit the menu.
EN
The main display shows the actual solar charging current of the
solar system in A.
The main display shows the actual solar power in % in relation to the
maximum possible value.
The main display shows the actual voltage of the house battery in
V.*
The main display shows the total solar charge generated in Ah since
the last reset.
button for 5 seconds to open the settings menu.
button until the progress indicator has scrolled through.
Using the solar monitor
15