Electrical Safety; Gas Safety - Kernau KGH 6464 User Manual

ELECTRICAL SAFETY

1. Plug the appliance in a grounded socket protected by a fuse conforming to the values specified
in the technical specifications chart.
2. Have an authorized electrician set grounding equipment. Our company shall not be responsible
for the damages that shall be incurred due to using the product without grounding according
to local regulations.
WARNING
If the surface is cracked, turn off the appliance to avoid risk of electric shock.
3. Never wash the appliance by spraying or pouring water on it. There is a risk of electrocution.
4. Do not touch the plug with wet hands. Do not pull the cord to plug off, always hold the plug.
5. Unplug the unit during installation, maintenance, cleaning and repair.
6. Make sure the plug is inserted firmly into wall socket to avoid sparks.
7. If the power supply cord (the cord with plug) is damaged, this cord shall be replaced by the
manufacturer or its service agent or an equally qualified personnel to prevent a hazardous
situation.
8. Do not use cut or damaged cords or extension cords other than the original cord.
9. Do not use steam cleaners for cleaning the appliance, otherwise electric shock may occur.
10. Make sure there is no liquid or humidity in the outlet where the product plug is installed.
11. An omnipolar switch capable to disconnect power supply is required for installation.
Disconnection from power supply shall be provided with a switch or an integrated fuse
installed on fixed power supply according to building code.
12. The power supply cord (the cord with plug) shall not contact the hot parts of the appliance.
13. Unplug the unit during installation, maintenance, cleaning and repair.
14. Appliance is equipped with a type ''Y'' cord cable.
15. The circuit breaker switches of the cooker shall be placed so that end user can reach them when
the cooker is installed.
16. Fixed connections shall be connected to a power supply enabling omnipolar disconnection. For
appliances with over voltage category below III, disconnection device shall be connected to
fixed power supply according to wiring code.
17. Do not remove ignition switches from the appliance. Otherwise, live electric cables can be
accessed. It may cause an electric shock.

GAS SAFETY

1. This appliance is not connected to burning products evacuation apparatus. This appliance
must be connected and installed according to the installation regulations in force. Conditions
regarding ventilation must be considered.
2. When a gas cooking appliance is used; humidity, heat and burning products are generated in
the room. First of all, make sure the kitchen is well ventilated when operating the appliance and
maintain natural ventilation openings or install a mechanical ventilation equipment.
3. After using the appliance heavily for en extended period of time, additional ventilation may
be required. For example open a window or adjust a higher speed for mechanical ventilation,
if any.
4. This appliance must be used only in well ventilated locations in accordance with the regulations
in force. Please read the manual before installing or using this product.
5. Before positioning the appliance, make sure local network conditions (gas type and gas
pressure) meets appliance requirements.
6. The mechanism cannot be run for longer than 15 seconds. If the burner is not on after 15
seconds, stop the mechanism and wait for at least one minute before trying to ignite the burner
again.
7. All kinds of operations to be performed on gas installation must be performed by authorized
32