Quick Setup; System Requirements - Samsung SCS26UC4 User Manual

Samsung verizon wireless network extender user guide
Hide thumbs Also See for SCS26UC4:
Table of Contents

Advertisement

System Requirements

An always-on broadband Internet connection with a minimum speed
and available bandwidth of 1 MB (3.1 Mbps to support the maximum
EVDO data rate.)
Note: Satellite, MiFi or wireless connections are not supported.
An available Ethernet (LAN) port on either your broadband modem or a
router connected to the modem.
Note: If you are connecting your Verizon Wireless Network Extender to a
router, please ensure it supports Virtual Private Networking (VPN).
Although most routers support this functionality, refer to your router's
product documentation to confirm compatibility.

Quick Setup

Setting up service on your new Verizon Wireless Network
Extender is fast and easy. This section outlines the procedures
needed to quickly set up the Network Extender.
Note: You may also visit
www.verizonwireless.com/b2c/store/
accessory?action=gotoSetup
Follow the onscreen prompts.
Confirm your package contains all components.
1.
Review the "Important Safety Information" on page 20
2.
before installing the Network Extender.
3
to view the online setup and usage tutorial.
Make sure that both your router and your Internet
3.
broadband modem are functioning properly. Refer to your
particular product's documentation for more information.
If possible, place the Network Extender near a window in a
4.
central location.
ISP
ISP
Connect one end of the included Ethernet cable to an open
5.
LAN port on the router (1) and connect the other end to the
WAN port located at the rear of the Network Extender (2).
Note: Plug the Ethernet cable into the Network Extender before connecting
the power supply.
Internet
Internet

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents