Cleaning And Care - Beem 03380 Manual

29

Cleaning and Care

PLEASE NOTE!
• Do not use any toxic, corrosive or abrasive cleaning
agents or scouring sponges to clean the product. These
may damage the surfaces.
1. Make sure that all components have cooled down
suffi ciently before you clean them.
2. Empty the coffee jug and the permanent fi lter completely.
3. Take the lid off the coffee jug.
4. Wipe the stand and the concrete base with a damp cloth.
5. Clean the coffee jug, the lid and the permanent fi lter with
warm water and a little detergent. The permanent fi lter on
its own is also dishwasher-safe.
Storage
•
Clean all components again before you store them away
(see the "Cleaning and Care" chapter) to avoid possible
mould formation. Mould can cause spots and damage on
the product that can no longer be removed / repaired.
Once all components have fully dried, store them in a dry,
clean, frost-free place that is protected from direct sunlight
and cannot be accessed by children or animals.
EN