Making Coffee With Coffee Powder; Cleaning And Care - Beem CM1131A-GS Manual

EN

Making Coffee with Coffee Powder

1. Fill the water tank (5) (see the "Handling and Operation" chapter – "Filling the Water Tank").
2. Open the filter compartment (12) .
3. Insert a filter (see the "Handling and Operation" chapter – "Inserting the Filter").
4. Add the quantity of coffee powder you want to the filter using the measuring spoon which
is supplied with the device or another suitable spoon. We recommend one level spoonful for
each 125 ml cup.
5. Press the MAHLWERK AUS (grinder off) button (18). The control lamp in the MAHL-
WERK AUS (grinder off) button lights up. The grinder shaft is not opened when the brewing
process starts.
6. Press the ON / OFF button (19) to start the brewing process. The operating lamp in the
ON / OFF button and the control lamp in the dial
coffee to brew it.
To end the brewing process prematurely, press the ON / OFF button. The operating lamp
in the ON / OFF button is lit constantly, the control lamp in the dial
device is switched off.
At the end of the brewing process, you will hear a beep, the operating lamp in the ON / OFF but-
ton goes out, the control lamp in the dial
es on the hotplate (14) (see the "Handling and Operation" chapter – "Keep-Warm Function").

Cleaning and Care

PLEASE NOTE!
• Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to
clean the device. These may damage the surface.
1. Clean the filter insert, its lid and the glass jug (13) after each use with mild detergent and
warm water or in the dishwasher.
2. If necessary, wipe the coffee bean compartment (2) and the lid (1) with a damp cloth.
3. Wipe the housing with a damp cloth. If necessary, use a little mild detergent to remove more
intense soiling.
4. Check the connecting cable regularly for any damage.
Cleaning the Grinder Shaft
1. Take the coffee beans out of the coffee bean compartment (2) (Apart from the few beans
that you cannot reach by hand.)
2. Open the filter compartment (12) .
3. Insert a filter (see the "Handling and Operation" chapter – "Inserting the Filter").
02688_Inlay_DE-EN-FR-ES-IT_A5_V2.indb 26 02688_Inlay_DE-EN-FR-ES-IT_A5_V2.indb 26
flash. Hot water is poured over the
is lit constantly and the device automatically switch-
26
goes out and the
31.03.2022 12:16:33 31.03.2022 12:16:33