Command For Remote Control; Ieee 488.2 Standard Command - Delta A9000 User Manual

User Manual
A9000
AC Power Source
 Star(*)：Represents this command is follow the standard of IEEE 488.2, it can be used
for all instruments support IEEE 488.2 command.
Example：*IDN?
Explanation：Common command to query instrument name. Instrument will

6.3 Command for Remote Control

6.3.1 IEEE 488.2 Standard Command

*ESE <n>
bit
Bit name
Bit
definition
*ESE?
*ESR?
occurs.
*IDN?
*RST
*RCL <n>
*SAV <n>
*SRE <n>
79 │ www.deltaww.com
answer its series number. DME-A902ABT A,000,000 will be the
answer for this AC source.
Set flag mask of standard event status register.
This command is for a register used for IEE488.2 defined standard events. It is
used for flag mask or control enable. Set by 1 enables target event detection,
and event detection is masked if setting is 0. No response to target events
when 0 is set. Bits configuration for standard events register are:
7 6 5
PON ---- CME
Power Command
on error
Query flag mask for standard event status register.
Query value stored in standard events status register, 1 represents event
Return string of AC source identification.
Parameter returns ： DME-A902ABT A,000,000
 DME-A902ABT A ： Name of AC source
 000,000
Make all parameters setting back to default factory setting. Must wait 10
seconds before sending next command.
Recall stored system setting.
parameter：1~4
save system setting
parameter：1~4
Flag mask setting for service events status register
4 3
EXE DDE
Execution Error related
error to instrument
： Version of firmware
2 1 0
QYE ---- OPC
Query Operation
error completed