Table of Contents
Advertisement
18
Specifications
Maximum Power Output
Maximum Power Output
Continuous Power Output
Continuous Power Output
Total Harmonic Distortion
Total Harmonic Distortion
Intermodulation Distortion
Intermodulation Distortion
(60 Hz : 7kHz, 4:1)
Frequency Response:
Frequency Response:
Phono Input
Line Level Inputs
Damping Factor
Damping Factor (20 Hz ‑ 20kHz, 8 ohms)
Input Sensitivity / Impedance
Input Sensitivity / Impedance
Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Input Overload
Input Overload
Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Preamplifier Output Level / Impedance
Preamplifier Output Level / Impedance
Signal to Noise Ratio (A weighted)
Signal to Noise Ratio
Phono Input (MM)
Line Level Inputs
Digital Section
Digital Section
Frequency Response
Frequency Response
Signal to Noise Ratio
Signal to Noise Ratio (IHF "A" weighted)
Input Sensitivity/Impedance
Input Sensitivity/Impedance
Preamplifier Output Level
Preamplifier Output Level
Coaxial/Optical Digital Signals
Coaxial/Optical Digital Signals
PC-USB
PC-USB
Power Requirements:
Power Requirements:
USA:
EC:
Power Consumption
Power Consumption
Standby Power Consumption
Standby Power Consumption
Normal
Network Standby
BTU (4 ohms, 1/8th power)
BTU
Dimensions (W x H x D)
Dimensions
Front Panel Height
Front Panel Height
Weight (net)
Weight
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel Hi-Fi logo are registered trademarks of The Rotel Co, Ltd., Tokyo,
Japan.
350 watts/channel, 4 ohms
200 watts/channel, 8 ohms
< 0.0075%
< 0.03%
20 Hz - 20kHz, 0 ± 0.5 dB
10 Hz - 100kHz, 0 ± 0.5 dB
600
5.2 mV / 47k ohms
340 mV / 5.6k ohms
540 mV / 100k ohms
52 mV
3.5 V
4.5 V
1.9 V / 100 ohms
80 dB
103 dB
10 Hz - 90k Hz (0 ± 2 dB, Max)
102 dB
0 dBfs / 75 ohms
1.43 V (at -20 dB)
SPDIF LPCM (up to 192k Hz 24 bit)
USB Audio Class 2.0
(up to 384kHz 32bit)*
*Driver installation required
Support MQA and MQA Studio
(up to 24 bits/384kHz)
Roon Tested.
120 volts, 60 Hz
230 volts, 50 Hz
500 watts
< 0.5 watts
< 2 watts
1239 BTU/h
431 x 144 x 425 mm
( 17 x 5
/
x 16 ins.)
7
8
3U (132.6 mm, 5
/
ins)
1
4
18.81 kg, 41.47 lbs.
RA‑6000 Stereo Integrated Amplifier
'MQA' or 'MQA.' indicates that the product is decoding and playing an
MQA stream or file, and denotes provenance to ensure that the sound is
identical to that of the source material. 'MQA.' indicates it is playing an
MQA Studio file, which has either been approved in the studio by the artist/
producer or has been verified by the copyright owner.
'OFS' confirms that the product is receiving an MQA stream or file. This
delivers the final unfold of the MQA file and displays the original sample rate.
"Made for iPod," and "Made for iPhone," means that an electronic accessory
has been designed to connect specifically to iPod or iPhone, respectively, and
has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory
with iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
Advertisement
Table of Contents
