Advertisement
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
7. Carefully lift the front base panel, open the left
and right side panels outwards from the inside, flat-
ten the front work panel.
8. Push down the narrow front cover panel (work
surface cover) and fix it on the right and left side of
the chamber. At the same time, connect the four
notches of the upper panel with the buttons stick-
ing out of the side panels.
9. The right and left side panels can be placed ver-
tically and taken out. By removing one of the side
panels, a second chamber can be added. Thus,
the working surface is doubled.
10. After pulling out the cable from the socket, the
small flap door can be re-closed. There is a small
hole for the cable; two devices can operate to-
gether.
11. Before folding together the device, press the ca-
ble retracting button; the cable will automatically
be drawn in. After this, close the flap door. Folding
the device together is done in reverse order of the
assembly.
Item 34220, 34251, 34259–34263
Page 7
02
2022-1
Advertisement
