Download Print this page

WilTec 34220 User Manual page 4

Airbrush suction system

Advertisement

If thrown, dropped, or exposed to pressure or tension, the device might malfunction or not func-
tion properly.
Never place the device near (highly) flammable material such as curtains.
Always make sure that the rotary disc that the workpiece is placed onto is centred.
After every use, the device must remain switched on for another 2–6 min to ensure self-clean-
ing.
Switch off the device and pull out the plug when the device is not in use.
If contaminated by large amounts of paint, the filter cannot function properly any longer and
must be replaced by a clean one.
To avoid damages to your health, never apply toxic, flammables, or explosive paints or material.
Always ensure sufficient ventilation of your work zone.
In commercial facilities, the accident prevention regulations of the competent professional as-
sociation must be observed.
In schools, educational establishments as well as hobby and self-help workshops, the use of
the device must be responsibly supervised by trained personnel.
If you have reason to believe that safe operation is no longer possible, immediately disconnect
the device from the power supply and secure it against unintentional restart.
The safety of operation of the device cannot be ensured any longer if
◦ it is visibly damaged,
◦ it does not operate any longer,
◦ it has been stored under unfavourable conditions or
◦ has been treated roughly during transport.
Properties
The suction system is foldable, light, and needs little space.
It operates at a low power consumption and high airflow, does not need an exhaust hose, saves
energy, and protects the environment.
It is equipped with a close-mesh filter that removes nearly all paint and liquid particles without
pollution the environment.
The cable and plug are in the inside of the device and can be pulled out if necessary; you can
have them retracted and rolled up at the push of the corresponding button.
With completely transparent chamber, two chambers being combinable for large workpieces if
needed.
The device has an on/off switch with a diode that is lit when the device itself is switched on.
Quiet operation at 52 dB only.
The system has a rotary disc that allows easy handling.
Technical specifications
Item number
Power supply
Input current
Air flow (
)
min
Noise level (dB)
Dimensions
opened
of one de-
folded
vice (㎜)
Weight (㎏)
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
34220
34251
3
4
4.5
4.5
Item 34220, 34251, 34259–34263
34259
34260
100–240 V / 50/60 Hz
12 V (direct current) / 1.5 A
6
8
approx. 52
420 × 240 × 150
400 × 200 × 30
9
9
34261
34262
34263
8
4
9
7
02
4
7
Page 4
2022-1

Advertisement

loading

This manual is also suitable for:

342513425934260342613426234263