Download Print this page

WilTec 30154 Operation Manual

Engine bridge

Download this manual

Operation Manual

Engine Bridge

ARTICLE 30154

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments, illustrations, functioning steps and technical data can differ

insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities please contact us.

Seite 7

http://www.WilTec.de

http://www.aoyue.eu

http://www.teichtip.de

Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 7 http://www.WilTec.de http://www.aoyue.eu...
Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
Page 3 Hex Nut M10 / M12 Washer Trench Support Handle Sleeve Variable Standing Bracket Grip Handle Rubber Sleeve Washer Load Hook M20 x 2,5 (330 mm) Bolt M12x25 Load Chain © by WilTec Wildanger Technik GmbH Seite 9 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
Page 4 Do not use the motor bridge if parts are bent or damaged.  Load Capacity 500 kg Bar Length 150.6 cm Chain Length 94 cm Weight (without chains) 17 kg © by WilTec Wildanger Technik GmbH Seite 10 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
Page 5: Disposal Regulations
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.