Time And Date - Htek UCV Series User Manual

Htek smart phones
Hide thumbs Also See for UCV Series:
Table of Contents

Advertisement

2. Enter the time for Backlight time (In seconds).
The default is 0, which means Backlight is always on.
3. Click
Note:
Backlight Time refers to the time into the backlight.

Time and Date

Time and date is displayed on the idle page, and it can be set automatically by SNTP
server or manually by manual setting.
To configure the time and Date by SNTP setting via Phone interface
1. Tap Settings→Basic→Time&Date→General or
Menu
→Settings→Basic→Time&Date→General
2. Tap Time Zone to change the Time zone.
3. Fill in the NTP Server1, NTP Server2.
4. Tap Save to save the configuration.
To configure time and date manually via Phone interface
1. Tap Settings→Basic→Time&Date→General or
Menu
→Settings→Basic→Time&Date→General
2. Tap Type to switch to Manual Settings mode
3. Change the right time, or you can input the right time.
4. Tap Save to save the configuration.
To configure the Time & Date Format via Phone interface
1. Tap Settings→Basic→Time&Date→Time And Date Format
or Menu
→Settings→Basic→Time&Date→Time And Date Format
2. Tap to change between 12 Hour or 24 Hour time display.
3. Tap to change date format.
4. Tap Save to save the configuration.
To configure the DHCP time via Phone interface
1. Tap Settings→Basic→Time&Date→DHCP time
2. Tap Switch to change between Disable and Enable.
3. Tap Save to save the configuration.
to save the configuration.
Customizing Your Phone
90

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UCV Series and is the answer not in the manual?

This manual is also suitable for:

Ucv20Ucv22

Table of Contents