Pc Port; System Setting; Factory Reset - Htek UCV Series User Manual

Settings

PC Port

Two modes for PC Port: bridge and Connect to Expansion Module.
To Select the PC Port via Phone interface:
1. Tap Settings→Advanced(password: admin)→Network→ PC Port→ Bridge
/Router/Connect to Module.
or Menu →Settings→Advanced(password: admin)→Network→ PC Port→ Bridge
/Router/Connect to Module.
2. Click Save and the pop-up box shows "System will reboot, Are you sure?".
3. Click the OK, then the phone will reboot.
To Select the PC Port via Web interface:
1. Click Network→ PC Port
2. Select As Bridge/Connect to Expansion Module.
3. Click and then click , the phone will reboot automatically.
Note: The As Bridge mode is selected by default, and the "Connect to Expansion
Module" mode is only required when the phone is connected to the expansion
module.

System setting

Factory Reset

To set Factory Reset via Phone interface
1. Press Menu→ Settings→ Advanced Setting (default password: admin)→ Phone
Setting→ Factory Reset
2. Press OK button in the warning page.
105