Htek UCV Series User Manual page 25

To place a call by Headset:
1. Tap (light will be green).
2. Enter the number.
3. Tap to send the call
Using headset to place and answer calls for all time:
1. Log into the webpage and click Setting  Preference.
2. Set Headset Priority to Enable.
3. Set Ring Device For Headset to User Headset.
4. Click SaveSet to save the setting.
5. Tap to activate the Headset priority mode.
To place a call by speakerphone:
1. Tap , or press the Line key, then you can hear the dial tone.
2. Enter the number.
3. Tap to send the call
To place a call from Call History:
1. Press Dial application or navigate to Menu
2. Select the desired call history.
3. Tap to send the call
To place a call from Contacts:
1. Press the Contacts icon or navigate to Menu
2. Select the desired contact from a contact group.
3. Tap to send the call.
Note:
1. The can be set as Send key. For more information, refer to
2. During a call, you can also change among Handset or Speakerphone mode.
 contacts  History
 contacts.
Key as
Call Features
.
Send.
25