Names Of Each Part - Hitachi PJ-TX300 Service Manual

3. Names of each part

●
Part names
Projector
Exhaust vent
► Do not block or cover the
projector's vents.
► To avoid being burnt,
please do not touch areas
near the vents while the
projector is in use or
immediately after use.
Lens
A bright light for projecting is
emitted from the lens.
► Please do not look into the
lens while the projector is
in use.
Elevator feet
Lamp cover
Covers the lamp.
► The lamp has a finite
product life. Preparation
of a new lamp and
early replacement are
recommended.
Intake vent
► Do not place anything that
may be sucked into or stick
to the vents underneath
the projector.
Ports
See next page.
► Please see the
"Connecting your devices"
section for more information.
PJ-TX300(C11H2)
Zoom ring
Focus ring
(Front right view)
(Bottom view)
(Rear left view)
3
Horizontal lens shift dials
Vertical lens shift dials
Filter cover
Covers the air filter and intake
vent.
► Maintain the air filter to
ensure proper ventilation.
Elevator button
Remote sensor
Lens cover
Strap hole
Elevator button
Control buttons
See next page.
Exhaust vent
► Do not block or cover the
projector's vents.
► To avoid being burnt,
please do not touch areas
near the vents while the
projector is in use or
immediately after use.
Elevator foot
Elevator button