Names Of Each Part - Hitachi PJ1065 Service Manual

3. Names of each part

Parts names
ZOOM Button
Used to adjust the size of the image.
MUTE Button
This button turns the sound on and
off. Press once to turn the sound off;
then press again to turn the sound
back on.
STANDBY / ON Button
Press this button to turn the power on
and off. When turned off, the
projector enters standby status.
LAMP Indicator
This lamp lights or blinks when the
lamp is off.
POWER Indicator
This indicator lights or blinks during
standby and during operation.
Remote Control Sensor
Lens
Foot Adjuster
Lens Cap
Use the remote control transmitter in front of the remote control sensor at a
distance of about 5 m or less and an angle of 30 degrees to the left or right
of the center.
Control Panel
Front/Right View
FOCUS Button
Used to adjust the focus of the image on
the screen.
INPUT Button
Press this button to switch the input. The
input changes in the following sequence
each time this button is pressed.
RGB1 RGB2 DIGITAL
COMPONENT S-VIDEO VIDEO
MENU Button
Displays the image menu.
RESET Button
Used to reset the initial settings.
TEMP Indicator
This indicator lights or blinks when the
internal temperature of the projector
rises and when the fan malfunctions.
Control Panel
Ventilation Openings
(exhaust)
Carrying Handle
Air Filter and Intake
for the Cooling Fan
Foot Adjuster
3