Table of Contents
Advertisement
6-13 White Blank Display
If the projector continues projecting a still image, inactive image or images that are not 16:9 aspect by 16:9
panel for long time, the LCD panel might possibly be printed.
To reduce this problem, please make the projector project a whole white screen for 1 hour or more.
Setup to the white blank display
1. Open MENU and select the START UP on the SCREEN menu using the [ ] and [ ] buttons.
2. Display the START UP Menu using the [
3. Display the STARTUP COLOR menu.
1) By the control panel
Continue press the [
for 3 seconds.
2) By the remote control transmitter
Press the [LIGHT] button one time, and press the [LIGHT] button again for 3 seconds.
4. Select the WHITE on the STARTUP COLOR menu using the [ ] and [ ] buttons.
5. Next, display the SCREEN MENU by pressing the [ ] button two time, then select the MESSAGE on the
SCREEN menu using the [ ] and [ ] buttons and select TURN OFF.
6. Set no signal by disconnecting or select disconnect channel.
7. White blank screen is displayed.
PJ-TX300(C11H2)
] button and select the TURN OFF.
] button first, then press the [
] button together with the [INPUT] button, and hold
2
Advertisement
Table of Contents
