Swema SwemaAir 40 Instructions

SWEMA AB

Pepparv. 27

SE-123 56 FARSTA

Tel: +46 8 94 00 90

Fax: +46 8 93 44 93

E-mail: swema@swema.com

Web site: www.swema.com

SwemaAir 40 Instructions

Contents:

1. Introduction......................... 1

2. Technical data........................ 1

vers 1.11 MB20111013

Table of Contents

Need help?

Do you have a question about the SwemaAir 40 and is the answer not in the manual?

Page 1 SwemaAir 40 Instructions vers 1.11 MB20111013 SWEMA AB Contents: Pepparv. 27 1. Introduction......1 SE-123 56 FARSTA 2. Technical data......1 Tel: +46 8 94 00 90 3. Start of instrument....1 Fax: +46 8 93 44 93 4. Data transfer to PC....2 E-mail: swema@swema.com...
Page 2 1. Introduction SwemaAir 40 is a thermoanemometer that measures air velocity and temperature. Air velocity is measured in m/s or fpm and temperature in °C or °F. SwemaAir 40 is delivered with two easily replaceable AA batteries. Standard, alkaline or regular batteries can be used. A 220V adapter (part no.
Page 3 4. Data transfer to PC Connect SwemaAir 40 to a computer by using ”PC-cable to SwemaAir” (Part no: 763040). The PC-cable has a RS232 connection so connect it to a free COM-port on the computer. If the computer hasn’t a COM- port use a USB-adapter (Part no: 583225).
Page 4 5. Alter settings by PC When SwemaAir 40 is connected to a PC it is possible to change some settings. Press %M ENTER ENTER to enter settings menu: [P] Point [S] Shut [T] Time constant 0 Press P or p to change between ”,” (comma) and ”.” (point) as indica- ting decimal (comma = 0) or (point = 1).