Program Conversion Overview; List Of Program Conversion Tool And Software To Convert The F Series; F 1J , And F 2 ) To The Fx3 Series - Mitsubishi Electric FX Series Replacement Manual

1. OVERVIEW OF TRANSITION FROM F SERIES (F
■ Main module of the FX
2-Φ4.5 mounting hole (16M and 32M)
4-Φ4.5 mounting hole (48M to 128M)
16M and 32M have no * mounting hole.
1.3

Program Conversion Overview

Converting programs from the F to FX3 series involves changing the models for the instructions
and element numbers in the basic instructions common to F and FX.
Unconvertible application instructions need to be modified using the programming tool for the FX3
series.
For information on program conversion rules, refer to Chapter 3.
For information on each programming and the operation and functions of program conversion
tools, refer to the manual for the relevant tool.
1.4 List of Program Conversion Tool and Software to Convert the F series (F
F , and F ) to the FX3 Series
1J 2
The following table shows how FX-20P-E(SET0) + FX-20P-E-FKIT can be used as a tool for pro-
gram conversion.
The computer software is used to perform debug after conversion.
For information on the production discontinuation period of programmable controllers, refer to
Appendix 1.
Tool for program
conversion
FX-20P-E(SET0) +
HPP
FX-20P-E-FKIT
Computer
GX Works2
*1 For information on the supported programmable controller version, refer to the FX-30P Operation Manual.
*2 For information on the operating environment of GX Works2, refer to the GX Works2 Operating Manual.
series
3U
W
W1
Program save destination and
creation tool for F
programmable controllers before
conversion
Save destination
Program memory
(built-in RAM and
memory cassette) of
F , F , and F pro-
1 1J 2
grammable control-
lers
*2 -
, F , AND F
1 1J
5
86 (when installing FX3U-7DM: 88.5)
Program save destination and
, F , and F modification tool for FX3 series
1 1J 2
programmable controllers after
Program
Save destination
tool
Program memory
(built-in RAM and
-
memory cassette) of
FX3 series program-
mable controllers
-
In the computer
) TO FX3 SERIES
2
External color: Munsell 0.08GY/7.64/0.81
Unit: mm
Top cover: Munsell N1.5
Model
W W1 Weight (kg)
FX -16M 130 103 0.60
3U
FX -32M
150 123 0.65
3U
FX -48M 182 155 0.85
3U
FX -64M 220 193 1.00
3U
FX -80M 285
258 1.20
3U
FX -128M 350 323 1.80
3U
M3 terminal screw for the terminal block
9
35-mm-wide DIN rail mountable
conversion Reference
Program
tool
*1
Chapter 2
FX-30P
GX
Chapter 3
*2
Works2
1
2
3
A1
A2
A3
,
1
13