Advertisement
Seat Assembly
1.
Insert the seat stem into the frame (see Figure 8a and 8b).
2.
Pull the quick-release lever free and insert the seat-post to the minimal insertion
marker indicated on the seat-post.
3.
Insert at least to the minimal indication on the seat stem using rotary movements.
You can use grease to help assembly.
4.
Tighten the quick-release clamp and then fold the lever to closed position. Minimal
torque specifications are 19.5Nm.
Attaching the pedals
Install the pedal marked "L" on the left crank and tighten, then install the pedal marked "R"
on the right crank and tighten.
Note: Damage will occur if pedals are not correctly and firmly attached.
12
Figure 8a
Figure 8b
Advertisement
