Johansson Profino Revolution Lite User Manual page 6

PROFINO REVOLUTION LITE (REF. 6714)
Push the rotary button for 2 seconds to access the menu
CHANNEL
SCAN
DISPLAY READOUT
6
EXPLANATION
Tap the rotary button to enter the channel scan menu
Scroll down to START and tap the rotary button to
start scanning
Scanning can take up to 1 minute
When scanning is finished, the number of detected
channels will be displayed. Manual changes can still be
done afterwards via the Input settings (next section)
Tap the rotary button to proceed in the menu
Sometimes, there can be transponders on the same
frequency coming from different antennas (e.g. CH40
is detected on input 1 and input 2). These are called
duplicate channels.
DUPLICATCH = When duplicate channels is ON, the
weakest of a pair of duplicate channels will be
transferred to the LTE band. The strongest of the pair
keep its frequency at the output.
When duplicate channels is OFF, the weakest of a pair
of duplicate channels will be rejected.
When REPOWER is ON, the device will do a rescan
after a power interruption of 6 seconds or less. If a
power interruption takes longer than 6 seconds,
channel settings will not change.
When REPOWER is OFF, the device will never
automatically rescan.