Table of Contents
Advertisement
PROFINO REVOLUTION LITE (REF. 6714)
1.6.
Configuring the Profino Revolution Lite
N
AVIGATING THROUGH THE MENU
Use the Johansson rotary/push button to navigate through the menu. This is very
straightforward and simple. The table below shows how the rotary/push should be used:
M
ENU OVERVIEW
CHANNEL SCAN
START
DUPLICATCH
REPOWER
REGION/COUNTRY
IMPORTANT! Before starting the configuration, it is advised
to set the correct region or country. Unpower the unit, push
the button and keep pushing the button while you repower
the unit.
Release the button when the display shows "RESET FINISHED". Now the product
is reset and will ask you to enter country or region. This will amongst others determine the
channel plan for VHF and UHF and the DC voltage for the inputs (12 or 24V).
DISPLAY READOUT
All the following menu items can be accessed without the reset procedure.
Push the button 2s to enter the basic
Push the button to confirm your
When rotating the button, you scroll
through the different screens.
INPUT V/U 1 - 3
OUTPUT
PRE-AMPLIFIER
LEVEL
DC
VHF ATTN
ADD CHANNEL
SETTINGS
EXPLANATION
To activate the correct channel frequency plan, select
the country or region where the Profiler Revolution
Lite is situated. Rotate to select and confirm by tapping
the rotary button.
The default setting is Europe. The Profiler Revolution
Lite is also operational in the following
countries/regions: Australia, Brazil, China, Hongkong,
Italia, New-Zealand, Russia, South Africa, UK and USA.
configuration.
selections.
ADVANCED
LANGUAGE
REGION
DC VOLTAGE
BANDWIDTH
S-BAND
FW VERSION
SERIAL NUMBER
EXIT
LOCK
NO LOCK
5
Advertisement
Table of Contents
