PROFINO REVOLUTION LITE (REF. 6714)
1.4.
Hardware installation
F
1: T
IGURE
OP VIEW OF PRODUCT
1.5.
Mounting the Profino Revolution Lite
•
Important: Mount the module vertically to a
wall in a well-ventilated room and leave a minimum
space of 15 cm around the product to guarantee a
maximum ventilation of the product
•
Connect an earth wire to the grounding clamp
•
Connect the inputs to the Profino Revolution Lite
•
Connect a coaxial cable to the output connector
for distribution of the signal
•
Power the device via the output (use the
Johansson Power Supply ref. 2438)
•
Configure the device using the rotary button
4