Current Balance; Checking Credits On User Cards; Adding A Payment Amount On A Single Machine - V-ZUG Card-System 1 Operating Instructions Manual

RFID (radio frequency identification) cards
▸ Press a button.
▸ Hold an RFID card
– user card
– charge card or
– totaliser card
briefly to the card reader 1. Detailed operat-
ing instructions can be found in the follow-
ing pages of this section.
A buzzer sounds for 0.3 seconds to indicate an action has been completed.
Each mode ends automatically after the predetermined time-out expires.
3.2

Current balance

Appliance 1
▸ Briefly press the
– ... Balance
– Moving
Appliance 2
▸ Briefly press the
– ... Balance
– Moving
3.3

Checking credits on user cards

Appliance 1
1
▸ Press the or
Please select appliance
–
▸ Hold the user card briefly to the card reader.
– Credit
This display goes out after 3 seconds. If the card has not yet
been removed from the card reader:
Remove card
–
▸ Remove the card from the card reader.
3.4

Adding a payment amount on a single machine

▸ Briefly press the
▸ Hold the user card to the card reader.
– New credit amount xxx.xx appears in the display.
▸ If the card has not yet been removed from the card reader:
Remove card
– ...
1
button.
xxx.xx appears in the display and the LED is illuminated.
appear after 10 seconds.
2
button.
xxx.xx appears in the display and the LED is illuminated.
appear after 10 seconds.
+
button.
appears in the display.
xxx.xx appears in the display.
appears in the display.
+
button.
appears in the display and the LED is illuminated.
1
CA RD -S
YS TE M
1
Nam e
Nom
Nom e Car d Nr.
Obj ekt
3 Operation
2
9