Special Cards; Operation; Using The Cards - V-ZUG Card-System 1 Operating Instructions Manual

3 Operation

2.7

Special cards

The cards described below are to be used by those who are responsible for the appli-
ance (property manager, owner, caretaker).
Charge card
The charge card is for the following 4 functions:
▪ Charging user cards
▪ Setting the tariff
▪ Setting the charge amount
▪ Setting the language
When a new charge card comes into contact with a cashier system for the first
time it is encoded and can then only be used with this particular appliance. In the
settings mode, the charge card can be used with any appliance.
Totaliser card
The totaliser card is for the following 2 functions:
▪ Scanning the total amount charged
▪ Resetting the total to zero.
3 Operation
3.1

Using the cards

The user and special cards are basically used in the same way. The charge and control
cards are for identification purposes only and can be removed after activating the corres-
ponding mode:
– parameter settings for language, tariff and amount charged
– charge mode or
– totaliser display
.
General note
The appliance has two buttons:
+
– labelled and
1
– labelled and
8
-
on the single machine.
2
on the double machine.
CARD-SYSTEM
LC
Objekt
CARD-SYSTEM
TC
Objekt