Table of Contents
Advertisement
2
Your appliance
2.1
Appliance description
The cashier system controls the power supply to the appliance connected based on the
amount debited from the user card. The length of time that electricity is consumed is
then measured and debited.
Any remaining balances that are not credited back, are stored in the appliance. Remain-
ing balances can be credited back at any time. Up to 60 remaining balances from differ-
ent user cards can be stored. Any remaining balances will be credited the next time the
same user card is used.
For separate parts of a programme such as spinning, rinsing, draining, etc., just hold the
user card to the card reader and select the relevant appliance for the cashier system to
activate the power supply. Parts of programmes will normally be charged at 10 rappen.
The appliance does not always debit the same amount of money for the same
wash or drying programmes, as the length of time that electricity is used depends
on various factors (load, amount and temperature of water, voltage, etc.).
– A stationary
– Moving
against the credited amount.
2.2
Selecting the appliance and programme displays
Only applies to double machines
Select appliance 1
Appliance 1 debiting (moving arrows)
Appliance 1 selected, not consuming power
Select appliance 2
Appliance 2 debiting (moving arrows)
Appliance 2 selected, not consuming power
The operating status is not shown during debiting, returning credit, loading, etc.
2.3
Basic position
Single and double machine
The backlight turns off when no text is displayed.
6
indicates that no electricity is being used.
indicate that electricity is being consumed and will be debited
LED illuminates
LED illuminates
Advertisement
Table of Contents
